Anker 531 Solar Panel 200W

Harness the power of the sun wherever your adventures take you with the Anker 531 Solar Panel 200W. Designed to provide portable solar energy for compatible Anker portable power stations, this foldable solar panel combines high-output monocrystalline cells, efficient solar conversion, adjustable positioning, and weather-resistant construction for dependable outdoor charging.

Whether you’re camping in the wilderness, travelling by road, spending time off-grid, or preparing for outdoor activities, the Anker 531 helps you turn sunlight into usable energy.

200W Solar Power

With a peak rated power of 200W, the Anker 531 Solar Panel provides substantial solar input for compatible portable power stations.

It features a 48V operating voltage and 4.17A operating current, allowing it to deliver solar energy through its XT-60 connection. Actual charging performance will vary depending on sunlight intensity, weather, panel positioning, and other environmental conditions.

Up to 23% Conversion Efficiency

The panel uses monocrystalline solar cells and a sunlight-trapping surface designed to maximize energy collection.

Anker specifies a conversion efficiency of up to 23%, helping convert more available sunlight into usable solar energy under suitable conditions.

For the best performance, position the panel directly toward the sun and adjust its angle according to the available sunlight.

3 Adjustable Angles

Optimize solar collection throughout the day with three adjustable positioning angles.

The built-in stand allows you to position the panel at approximately:

• 30°
• 45°
• 60°

Adjusting the panel toward direct sunlight can help maximize solar generation.

Built for Outdoor Conditions

The Anker 531 features IP67 waterproof protection, making it suitable for outdoor use and wet-weather conditions.

This weather-resistant construction makes it a practical companion for camping, outdoor travel, and off-grid applications.

Important: While the solar panel itself is IP67 rated, Anker specifies that the XT-60 output port should not be exposed to rain or water without its protective rubber plug.

Foldable and Portable

The 531 Solar Panel folds down into a compact form for easier transportation and storage.

When folded, it measures approximately 570 × 602 × 60mm, while its unfolded dimensions are approximately 602 × 2130 × 20mm. At approximately 9.23kg, it can be transported between campsites, vehicles, outdoor locations, and off-grid destinations.

Simple XT-60 Connection

The Anker 531 features a dedicated XT-60 output port for connecting to a compatible portable power station.

Simply unfold the panel, position it toward the sun, connect the appropriate solar charging cable, and allow the connected power station to collect solar energy.

The panel itself does not store electricity, so a compatible portable power station is required to store the generated energy.

Designed for Off-Grid Power

Pair the Anker 531 with a compatible portable power station to create a convenient solar charging setup for outdoor and off-grid applications.

It is well suited for:

• Camping
• Road trips
• RV adventures
• Remote work
• Outdoor activities
• Emergency preparedness
• Off-grid locations

Anker’s current support information identifies the 531 as specifically designed for the PowerHouse 767, while its documentation also states compatibility with compatible power stations featuring an 11–60V XT-60 input. Check your power station’s specifications before purchase.

Perfect for Outdoor Adventures

Camping

Generate solar power for your compatible portable power station while you’re away from conventional electricity.

Road Trips

Take foldable solar power with you and recharge your compatible power station during extended journeys.

RV & Outdoor Travel

Use solar energy to supplement your portable power setup while travelling or spending time outdoors.

Off-Grid Living

Use sunlight as a renewable energy source for compatible portable power stations in remote locations.

Emergency Preparedness

Keep a solar charging solution available for situations where access to grid electricity is limited.

Key Features

200W Peak Power

Provides up to 200W of rated solar power under suitable conditions.

Up to 23% Conversion Efficiency

Monocrystalline solar cells and a sunlight-trapping surface provide conversion efficiency of up to 23%.

3 Adjustable Angles

Position the panel at 30°, 45°, or 60° to help optimize solar exposure.

IP67 Waterproof

Designed with IP67 waterproof protection for outdoor and wet-weather use.

Foldable Design

Folds down for convenient transportation and storage when you’re on the move.

XT-60 Output

Uses an XT-60 connection for connecting the panel to compatible portable power stations.

48V Operating Voltage

Provides a rated operating voltage of 48V with a rated operating current of 4.17A.

Outdoor Ready

Designed for camping, travel, off-grid adventures, and other outdoor applications.

Key Specifications

These specifications are based primarily on Anker’s official product and support documentation.

What’s in the Box

• Anker 531 Solar Panel 200W × 1
• MC4 Solar Charging Cable × 2
• MC4 to XT-60 Solar Charging Cable × 1
• Safety Manual × 1

The official Anker listing specifies two 3m MC4 solar charging cables and one 0.5m MC4-to-XT-60 cable.

Important Note

The 200W rating represents the solar panel’s rated power, not guaranteed real-world charging output. Actual power generation depends on sunlight intensity, weather, panel orientation, temperature, and other conditions.

Suggested SEO Product Title

Anker 531 Solar Panel 200W | Up to 23% Efficiency | IP67 Waterproof | Foldable Monocrystalline Solar Panel | XT-60

Suggested Meta Description

Anker 531 Solar Panel 200W with up to 23% conversion efficiency, monocrystalline cells, 3 adjustable angles, IP67 waterproof protection and a foldable design. Ideal for compatible Anker power stations, camping and off-grid adventures.